• SilverFast - Quality Scanner and Digital Imaging Software made in Germany since 1986
demo_06 update_06
 

Historia de las versiones

Version: 9.1.4 (2022-05-18)

  • Bug:
    • General: Fixed an issue where settings couldn't be loaded in the "scan dimensions" dialog.
    • General: Fixed an issue where SRDx would cause a crash on larger images.
    • General: Fixed an issue where the selected language would change after the update.
  • GUI:
    • General: Fixed an issue which made the Auto-CCR shortcut unresponsive on Windows computers.
    • General: Fixed some UI issues in the welcome screen.
  • Installation:
    • General: Fixed an issue where SilverFast wouldn't start on Windows 7 and Windows 8 computers.

Version: 9.1.3 (2022-05-11)

  • Task:
    • General: Under certain conditions the input profile display below the preview was not updated when a profile was changed in the "CMS" tab of the preferences. The profile is now updated correctly.
    • General: Fixed an issue for SE and SE Plus versions which made the frame finding always use the default settings instead of the settings of the current frame.
    • General: Fixed an issue in the metadata of grayscale images when exported with the export dialog. The metadata falsely claimed that the Adobe RGB profile was embedded, while in fact it was not.
    • General: Fixed an issue where images from the OpticFilm 7300 were too bright.
  • Bug:
    • General: Error message "no pictures folder found" no longer comes when starting SilverFast.
    • General: Fixed an issue with the social media widget in HDR Studio when switching back and forth between images in the JobManager.
    • General: Fixed an issue where NegaFix would use low resolution data until moving or changing the frame even if a Hi-Res preview had been done before.
    • General: Fixed an issue which made the PF 135 scanner save film strips as a whole rather than as individual images.
    • General: Fixed an issue for automatic numbering which resulted in a wrong start index if SilverFast was shut down between two batch scans.
    • General: Fixed an issue where the SAC would stop scanning before finishing all images.
    • General: Fixed an issue for Nikon FW scanners which lead to batch scans not being completed on new M1 Macs.
    • General: Fixed an issue for copying the frame finding function in the JobManager which could lead to frames which were too small.
    • General: Mouse scrolling for the gamma slider is now disabled.
    • General: The NegaFix profiles for the Plustek OpticFilm 8300i have been added to HDR Studio.
    • General: Fixed an issue where SilverFast didn't display the NegaFix profiles for the Plustek OpticFilm 8300i until NegaFix was initiated again.
    • General: The name of the Kodachrome profile for the Nikon LS-5000 ED was mispelled and has been corrected.
  • Feature:
    • General: Some scanners from Pacific Image Electronics and Reflecta can do the Multi-Exposure and the regular exposed scan in one pass again.
    • General: Frames now can be adjusted without changing the aspect ratio. Click and hold the "SHIFT"- key and modifiy one of the sides to change the size and keep the aspect ratio.
    • General: In WorkflowPilot mode the batch scan can now be started right away without having to wait for the end of the first scan.
    • General: Some additional filter options have been added to the VLT filter in HDR Studio.
    • General: A new image automatic "RedCCR" was added. This automatic is used for very strong red color casts, from which old Ektachrome slides may suffer for instance.
    • General: Instead of leaving the WorkflowPilot mode (blue globe) at the end of a WFP scan SilverFast now offers the choice to exit WFP mode or to go back to "Start" to do another scan.
    • General: In addition to copy & paste to create new frames, it is possible again to move a frame while pressing the ALT (Option)- Key in order to create a copy of the frame at the new position.
    • General: Frame settings can now be copied using CMD (CTRL) + C and pastend using CMD (CTRL) + V. Target an empty area to create a new frame with the copied settings or target an existing frame to overwrite its settings with the settings you copied.
  • GUI:
    • General: SilverFast now displays a tooltip for features that are not available when scanning RAW data.
    • General: Visibility for text has been improved in the dark mode.
    • General: Fixed an issue where the HDR Studio VLT wouldn't display the HDR RAW banner for RAW files which are scanned into the folder which is open in the VLT.
  • Support:
    • General: Fixed an issue where the Windows Image Aquisition service prevented SilverFast from accessing the scanner, leading to the message that "there was a problem with the scanner driver".

Version: 9.1.2 (2021-12-21)

  • Bug:
    • General: Fixed a crash when scanning into jp2 files while using the Epson Gray - Gamma 2.2. profile.
    • General: Fixed an issue in the sequential numbering which would begin with the lowest index available instead of the selected one.
    • General: Fixed an issue where SilverFast would use "cm" instead of "inch" as measurement unit on startup.
    • General: Fixed an issue for the Export Dialog which would allow HDRi format for reflective scans and scanners without IR lamp.
    • General: Fixed an issue which would leave SilverFast unresponsive after cancelling a multi-page PDF scan.
    • General: Added the possibility to use leading zeros for the index.
    • General: Fixed an issue for files with more that 1GB which would be saved without embedding a profile.
    • General: Fixed an issue which could cause the software to freeze after cancelling the export in the ExpressScan popup.
    • General: Fixed an issue where ExpressScans would create files with invalid meta data.
    • General: Fixed an issue for the JobManager which would crash on Windows computers after loading a previously saved Job.
    • General: Fixed an issue which would cause the Single Archive Command to crash if the preview was rotated beforehand.
  • Feature:
    • General: It is now possible to use the frame finding function with the Epson Perfection V800 and V850 while using the film holders of the Perfection V700 and V750 and vice versa.
    • General: The VLT has a new filter function which allows to use multiple options to filter your images recursively to find matching images quickly.
    • General: The input profile used can now also be selected via the status bar.
    • General: Densitometer Points can now be created or moved by using the ALT key instead of the SHIFT key. Press ESC to leave the create/edit mode. We've added a button to the Densitomter to toggle the create/edit mode on or off.
    • General: Added frame sorting options for SE and SE Plus to the preferences > special.

Version: 9.1.1 (2021-11-30)

  • Bug:
    • General: A problem has been solved where SilverFast wouldn't do the ME scan if a 100% preview has been done previously.
    • General: Fixed an issue with large IR offsets which could lead to a crash.
    • General: Fixed an issue with would cause the preview not to update after deactivating certain tools.

Version: 9.1.0 (2021-11-23)

  • Task:
    • General: Mouse-over and click effects have been added for better visual feedback.
    • General: Default quality factor for "lossy" jp2 files is now 100% (up from 80%). "Losless" setting now hides the compression controls.
    • General: Densitometer values can now be displayed in the histogram.
  • Feature:
    • General: SilverFast SE Plus and higher now offer a Multi-page PDF maker which can be found in the vertical toolbar of the scanner version or the export dialog of HDR versions.
    • With SilverFast's ExpressScan Feature, SilverFast Archive Suite now automatically speeds up batch scans. Further information can be found here: https://www.silverfast.com/highlights/expressscan/en.html
    • SilverFast's Ai Studio Histogram features an extra expert option now: Gamma adjustment
    • General: It is now possible to stay in WorkflowPilot mode after completing a workflow.
  • Quality:
    • General: Improved iSRD handling of Kodachrome film. Defect corrections quality improved. Better handling of larger scratches.
  • Scanner Support:
    • Plustek OpticPro A320E: SilverFast now supports the Plustek OpticPro A320E scanner.
    • General: The Epson Perfection GT-S650 is now supported.
  • Other:
    • General: Neutral points are now displayed in the preview with their corresponding values.
    • General: The Selective Color Correction now uses a pipette mouse cursor. Press ESC to leave the color pick mode.