All versions with camera raw support: Added white balancing profiles for raw images of the following cameras: Canon PowerShot G11 and Canon PowerShot S90.
All versions with camera raw support: Added support for raw images of the following cameras: Fuji FinePix 205EXR, Leica X1, Panasonic FX180, Ricoh GR Digital III, Ricoh GXR with A12 module and Ricoh GXR with S10 module.
All versions with camera raw support: Added support with white balancing profiles for raw images of the following cameras: Mamiya ZD, Sony Alpha 500, Sony Alpha 550, Nikon D3S, Olympus E-P2, Panasonic FZ38 and Pentax K-x.
IMPROVEMENT:
Epson: Added NegaFix profile for Kodak Ektar 100 to the NegaFix sets for Epson scanners
Nikon film scanners: Added NegaFix profile for Kodak Ektar 100 to the NegaFix sets for Nikon film scanners
BUGFIX:
All versions with camera raw support: Removed black border that was visible at the right side of converted raw images from the cameras Olympus E-30 and Olympus E-620.
All HDR/DC/etc.: For scans obtained from Agfa, Kodak, LaCie, Mediax, Microtek, Pie, Polaroid, Plustek, QuatoXFU, Quato(Film), Reflecta scanners: use scanner specific auto sharpen tables in the HDR/DC/etc. versions
All versions with camera raw: Full camera raw support with profiles for Sony Alpha 850, Panasonic Lumix DMC-GF1, Nikon D300s, Nikon D3000, Leica M9 and Canon EOS 7D.
All versions with camera raw: Camera raw support (without profiles) for Canon PowerShot S90 and Canon PowerShot G11.
HDR Studio and DCPro Studio: added new feature "HotFolder"
All HDR/DC/etc.: For scans obtained from Epson scanners: use scanner specific auto sharpen tables in the HDR/DC/etc. versions
BUGFIX:
All with IT8 calibration: Under Windows7 with an Aero-Theme active, the IT8 calibration could hang on some machines, already when opening the IT8 dialog. This is fixed now.
General: fixed crash that could happen when using 64bit HDRi pictures in combination with iSRD,USM and descreening.
HDR and DC versions: HDR and DC versions now contain a special auto sharpness table such that HDR images scanned with Epson scanners will be processed like in the Epson-Ai version.
HDR and DC versions: When opening an HDR file scanned with SilverFast, then the corresponding (scanner specific) set of NegaFix profiles is chosen automatically in NegaFix mode.
BUGFIX:
Several Canon Scanners: Older Canon are working again (not found with 661r2), CanoScan 4400F was identified as 5600F and not working properly. Both bugs fixed.
General: Added HDRi support for the following Epson Scanner
Epson Perfection 4870, 4990, V700 & V750
All versions with camera raw support: Added camera raw support for the following cameras: Panasonic Lumix GF1 and Kodak EasyShare Z980 (Kodak EasyShare Z980 with white balance profile).
BUGFIX:
All versions with camera raw support: Fixed an error that occured with Canon EOS 50D raw images.
all Nikon-Maid scanners: plugin and installer now have Vista- and Vista64-compatibility
Nikon LS 5000ED / Super Coolscan 5000 ED: A different transfer mode with the Nikon LS-5000 is used now, so that there is a Resolution improvement for scans over 2000 dpi.
Nikon LS-9000 and LS-8000: Further improved iSRD to avoid producing pixel-sized artifacts with film material that had the grain visible in the infrared channel on the Nikon LS 9000 and LS 8000.
BUGFIX:
Reflecta ProScan 3600 & 4000, Mediax WorkScan 3600Pro, PIE 3600Pro & 3650Pro3: the following behavior has bennd fixed: no film movement tools available - can not scan filmstrips.
All versions with camera raw support: Added support for Fuji FinePix S9100 raw images with raw profiles.
IMPROVEMENT:
All scanner versions: SE versions allow MultiSampling only when the scanner offers it "in hardware". All higher versions (SEplus, Ai, Ai Studio) allow MultiSampling. All Demos allow MultiSampling.
All versions with camera raw support: Added support for Nikon D300 raw images that use Nikon compression.
All versions with camera raw support: Added Camera raw support with white balance profiles for Olympus E-P1, Olympus E-450, Panasonic GH1, Pentax K7, Sony A230, Sony A330, Sony A380 and Fuji FinePix S9100.
General: Added Mac OSX Snow Leopard support.
BUGFIX:
Canon CanoScan 8800F: Multi-Exposure scans with the CanonScan 8800F sometimes resulted in color shifted images when a iSRD-Preview scan had been performed before.
All versions with VLT: Fixed bug that caused errors with VLT trying to display thumbnails from image file aliases (e.g. thumbnails from synchronized iPhoto folders).
General: user defined motive settings are now contained to the corresponding popup in the JobAddOptions-Dialog.
BUGFIX:
Nikon LS-9000 und LS-8000: The Nikon LS9000 und LS8000 do now fully support the 869M medium format holder, problems with offset and distortion when using the 6X6 part of the holder have been fixed.
All with iSRD: possible striping of large images processed by iSRD.
All versions with camera raw support: Camera raw support with white balance profiles for raw images from Canon EOS 500D.
DCPro and HDR versions, all scanner versions with iSRD: HDRi Format added.
All iSRD Scanner versions can now save 64 Bit HDRi Color images or 32 Bit HDRi Grayscale images.
Those files contain 48 Bit / 16 Bit Raw image data AND 16 Bit raw Infrared channel Information.
So this is a COMPLETE raw scan for capable scanners.
Those images can be loaded and processed with iSRD by our DCPro and HDR versions !
General: Added Support for Photoshop Elements 7(PC)
General: CanonScan 4400F is now supported by SilverFast.
IMPROVEMENT:
All versions with iSRD: Improved automatic iSRD mode.
All versions with iSRD: modified iSRD parameter to improve visual iSRD output on every image type.
Especial reduced artifacts on Kodachrome images.