Gregory Knipp (2010-02-23) (英語) - I’m an amateur photographer currently involved in a project to digitalize a collection of old 35mm slides, 35mm and 120 negatives, as well as color and B&W photos. After my original scanner died, I purchased an Epson V-750 PRO. I was happy to see LaserSoft Imaging’s SilverFast Ai bundled with it since I had used SilverFast before and had obtained very good results with it. I have since upgraded to the Ai Studio version.

Initially when I started using SilverFast, I was just doing basic scans and then doing all of my color corrections in Photoshop Elements 5.0. However, as I continued to learn more about SilverFast’s powerful tool set, I found it easier to use SilverFast for my color corrections. I load up my scanner, do a prescan, and then color-correct each image using 48-bit data. Then I run a final batch scan which outputs the high quality corrected 48-bit images into 24-bit mode. SilverFast’s 48->24 mode option makes this possible and provides the following advantages: (1) outputting color corrected images in 24-bit mode consumes less disk storage space while still providing the quality I need, and (2) since Photoshop Elements has limited 48-bit editing functionality, using SilverFast saves me from having to purchase a separate 48-bit image editor to do post-scan color correction and then manually convert images from 48-bit to 24-bit mode. Note that SilverFast does have the option of outputting color corrected images in 48-bit mode if desired.

I use SilverFast IT8 color calibration targets and a monitor calibration tool (Spyder2) for color management in my workflow and have been very pleased with the results. On the rare occasions that I have had technical issues with SilverFast, I found LaserSoft Imaging’s support folks to be very helpful. Whether a professional, or a perfectionist amateur like myself, I would recommend SilverFast scanning software to anyone who is serious about producing the highest quality scanned images.
Andreas Krämer (英語) - I have owned the CanoScan 8600F for a while now, I would like to make a statement about its quality. I purchased the CanoScan 8600F in order to scan my film positives and color negatives. After the first trials it was clear that the quality of the CanoScan 8600F was superb! I am using LaserSoft Imaging's scan software "SilverFast SE Plus ME V. 6.5"; under Windows Vista (32-bit).

It is noticeable that the removal of scratches and defects immediately produces great results without the need to refer to the manual or by trial and error. If desired, all parameters can be set and saved to one's own preferences. Even the most professional demands are met. "ME" stands for Multiple Exposure which reduces the amount of noise and graining in any scan. Though the scanner does produce decent results with the basic software by Canon, but its true potential is unlocked only when SilverFast is used. SilverFast is a definitive MUST for the CanoScan 8600F. MultiExposure sets the high standards for this. The scanning speed is also greatly increased by SilverFast.

Facit:

In combination with SilverFast SE Plus "ME" the CanoScan 8600F produces excellent quality and increased scanning speed when compared to Canon's ScanGear. The entire scanning process is professionally controllable and does not require any post processing of the scanned images."

Scan quality slides and negatives with SilverFast SE® •••••
Scan quality of documents with SilverFast SE® •••••
Scan quality slides and negatives Canon ScanGear •••
Scan quality of documents with Canon ScanGear ••••

Scanning speed with SilverFast SE® •••••
Scanning speed with Canon ScanGear •••
Jenn P. Zonca - 私は SilverFast AI Studio と CanoScan 8400F を使用しています。 SilverFast のコントロールはスキャナー純正ソフトと比べて、より優れたシャープネス、コントラスト&彩色を透過&ネガで得る事ができ、よりオリジナルイメージに近づけるようになりました。もう他の製品にはもどれません!

SilverFast AI Studio の最強のコンビ、AACO(オートコントラスト)、マルチサンプリング、そして MidPip4(カラーキャスト除去)は、CanoScan 8400F ソフトで処理が難しいイメージを得る事が可能になりました。

SilverFast AI Studio NegaFix は、CanoScan 8400F の純正ソフト以上に素晴らしいカラーネガ処理をやってくれます。SilverFast AI Studio のツールと CanoScan 8400F で、フィルム専用スキャナーに匹敵する透過&カラーネガイメージを手に入れる事が可能です。
John McNeill - 写真愛好家そして家系図研究を趣味にしているものとして、 私は過去数年間で数千ものイメージをスキャンしてきました。 私がスキャンしたイメージは、市民戦争時代の銀板写真、1800年代から今日までの家族写真やスクラップブック、1950年代のネガ、ベトナム戦争時の35mmスライドなどです。現在、私は CanoScan 9550F スキャナー& Windows XP/XP Pro で使用しています。

多くの CanoScan 9550F の好意的なレビューにも拘わらず、ScanGear ソフトでのオリジナルのスキャンは平凡なものであり、混ぜ合わさったな結果(ハイライト&シャドウでのディテール不足や色とび、さえない画像)を伴うものでした。オリジナルスキャンの平凡な結果を元に、私はスキャニングソフトを変える事にしました。

私が選んだソフトは SilverFast Ai IT8 、その結果は群を抜いたものでした。ハイライト&シャドウはより微妙なディテールを見せ、IT8キャリブレーションからの正確なプロファイルは精緻な色での引き締まったイメージになりました。加えて、バッチモードと自動フレーム検知は時間の節約に貢献しています。

総合して、SilverFast Ai IT8 は素晴らしいソフトです。優秀なスキャンとプロダクティビティを向上させる機能は、優れたテクニカル&カスタマーサポートとあいまって、CanoScan 9950F スキャンソフトのスタンダードに作り上げ、CanoScan 9950F のポテンシャルを限界まで引き出してくれます。
Larry Welliver - SilverFast は全てのキャノンユーザーが持つべきものです。使いやすく、スキャンイメージのクオリティを大きく向上させる多くの機能があります。まさに1回目のスキャンで多くの時間を節約する事ができます。 SilverFast は純正ソフトでは得がたい結果を生み出す、11種のイメージタイプと8種のフィルターを選ぶ事ができます。

私は SilverFast を 2006 年に Canon 9950F 用に購入して、 MacBook Pro & OSX 10.4 に繋いでいます。ソフトのインストールは簡単で、バグもなく、それ以来ずっと使いつづけています。 私は旅行、イベント、家族などの全てのタイプの写真をスキャンしております。これらの写真はカタログ、アルバム、スクラップブック、プレゼン&ビデオに使用しています。私は非常に満足しているユーザーです。
Roy Sprague - カラーネガスキャニングの新参者として、技術的に洗練された SilverFast AI のような製品が、 私の CanoScan 8600F に付属したベーシックな Windows XP ソフトよりもはるかに容易に私の風景/自然フィルムイメージのアーカイブをデジタイズする事を知って驚いています。 Canon ソフトで作成したイメージのフォトショップ編集&修正で費やした時間と労力は、 SilverFast のツールで優れた結果を作り出すのに必要なものをはるかをオーバーしています。 オートアジャスト、カラーキャスト除去、ACR(退色復元)等のオート機能は処理をシンプルにしてくれます。また、SilverFast でのスキャニングが割と高速であるのに気づきました、48-bit SilverFast スキャンと 24-bit Canon スキャン比較でも同様でした。私は数百のイメージをスキャンしていたので、プロレベルの柔軟さと Canonソフトで得がたいコントロール性を持 JobManager での更なるプロセス自動化が楽しみです。

SilverFast QuickTime ムービーとドキュメント類は、私の進行中のプロジェクトに実に役立ちました。Canon 純正ソフトに付属するドキュメント類はベーシックなもので、各機能とコントロールの正確な効果を決めるためのテストに時間がかかるでしょう。 これはまったく逆効果であり、SilverFast 製品の強さ - 拡張型ドキュメントによってもたらされる強固なサポートを示すものです。

Canon スキャナーや別のミッドレンジスキャナーでベストな結果を得たいなら、私は SilverFast を勧めます。
Anthony Peperone - 私は最近、SilverFast Ai Studio を購入し、28年ものの Tri-X 400 ネガをCanon 9550F & Windows XP 環境でスキャンに使用しています。

その結果は私の予想していたものを超えるものでした。他のソフトを使用した後、私は失望し、ニューオーリンズの Natchez on the Mississippi River「ミシシッピ川のナチェズ族先住民」 のオリジナル暗室プリントに匹敵するとは思えませんでした。その時、私は SilverFast を試してみたのです。それはまるでマジックでした。私のオリジナルプリントのクオリティを超えたのです。 SilverFast が反射や透過メディアのディテールを引き出す力は、他のソフトよりもはるかに抜きん出ています。 SilverFast だけが微妙なディテールを捉えることができます。 SilverFast を使い始めるまで実際、私は何が欠けていたのかか分からなかったのです。 SilverFast が拾って再現できるモノクロの微妙なシェードに私は感心しました。 他のソフトでは自分の Canon 9950F でそれが可能だとは思えませんでした。

もしあなたが Canon スキャナーで最高品質を欲しいなら、SilverFast は絶対に「必須アイテム」です。

私はモノクロとカラー透過&プリントで SilverFast を使用しており、優れたイメージクオリティになっています。先進のプロフェッショナル機能全てをもっていますが、プログラムはオートパイロットで「飛行」するようデザインされています。 プリセットされたシンプルなステップを一つずつ進むだけで、優れた結果が保証付です。 プリセットされたステップは個別のプリファレンスも可能で、いつでも個々のニーズに合わせて切り離すこともできます。 必要に合わせて簡単にも専門的にもできますが、どちらにせよ、結果は他よりも優れたものです。 まさに一回目のスキャンによる、短時間スキャンで処理しながら、シンプルで俊敏なステップはあなたの仕事の効率をアップさせつつ、高品質を維持しています。
Thanks, SilverFast!
Richard Jacobs - 私は最近プロジェクトをスタートしました。アフリカ探検旅行の25年経った数百のスライドのスキャニングです。旧コダクロームとエクタクロームはその経年を見せます。私は自分のスキャナー、 CanaScan 8600F で操作した結果に満足しませんでした。そして、ジョージ・デウォルフの "Digital Photography Fine Print Workshop" で SilverFast を紹介されました。 SilverFast は、以前の私が使えなかった様々なレンジのコントロールが使え、 スキャニングワークフローの各要素でしっかりとした管理を可能にしています。 その成果はドラマティックに改善されました。カラーキャスト除去、カラーバランス、シャープネス、ホコリ&キズ、バッチスキャン等を今、たやすく使いこなせます。 そして SilverFast は非常に高速です。今、私が使う唯一のスキャニングソフトになりました。

もっと早く見つければよかったと思います。
PBase Forum, Plustek 7200/7200i - 私は Plustek 7200 スキャナーでずっと素晴らしい写真を見てきましたが、ネット上でこのスキャナーのポジティブなコメントは僅かなものです。一般ユーザー向けフィルムスキャナーは有名ブランド(ニコン、キャノン、コニカミノルタ等)に独占されていますが、私の予算の範囲外です。 Plustek 7200i という製品は他社製品と比べてリーズナブルな価格ながら、SilverFast の iSRD 赤外線ホコリ除去が付属します。

私はこの製品に関する全情報を知りたいのです、特に iSRD 機能についての... [詳細を読む...]
Chris Bourne (Design Alliance) - ひとつ私が理解できない事がありますが、これはあくまで批評です。 なぜ Canon は優秀なスキャナーを作って限定されたドライバを付属させるのでしょうか? SilverFast スキャン効果は純正ドライバに対して素晴らしいものです。まるで違うマシンを使っているようです!

あなたはこの SilverFast 転向者を当てにする事ができます! (http://www.the-design-alliance.com)
John Harvey (2006-10-16) - 私は Leaf 45 スキャナーをここ5年程利用してきました。 SilverFast AI が対応した頃からのユーザーです。始めはプログラムの改良も遅いものでした。 LSI社のスタッフとカールハインツ(CEO)は、Leaf 45 (現35)が多くのフォトグラファーに認知されていない頃からこの仕事をコツコツとやってきました。彼らはこのスキャナーが実に優れた製品である事を認識していました。そう、彼らはスローテンポなのですが、その成果は倍の価値があるといえます。我々はかれらがこのプロジェクトを引き受けてくれた事を感謝しましょう。

私はショーのための古い 6x6 モノクロネガのスキャニングをやり終えたところです。 これらは結構ほこりだらけで、正直、印刷できそうかは分かりませんでした。 私は Leaf45 をオンにして SRD オプション(SilverFast Ai 搭載のソフトベースのホコリ除去)を使ってみました。最初、プログラムに適用させるのが少し難しかったのですが、結果はその役目を果たしたといわなければなりません。 あなたが Leaf スキャナーをお持ちなら、このソフトをトライしてみるべきだと今、確信しました。彼らはその価格を抑えており、十分な価値があると考えます。 私はLSI社とは関係ありませんが、彼らが私のスキャナーの寿命を伸ばしてくれた事がただうれしいのです。
Cliff Perrin (2006-10-11) - 私はスキャナーを仕事とプライベートの両方の環境で使いつづけています。 これは1990年代初期の間に「手頃な」高品質の製品がマーケットに出回るようになったからです。 大きな問題のひとつに、提供される OEM 製スキャナーのドライバの限界が実に視覚的にスキャニング に表れてきた事です。
SilverFast は、ワークフローの各レベルでイメージの総合管理を実現するフル機能、カスタム製ドライバを伴ってレスキューに来てくれました。 彼らは全てのスキャナーメーカーが追いつくべき基準です。SilverFast 製品は実にうまく働いてくれます! 私の言葉だけでなく、フリーのデモ版をダウンロードしてその違いを見て下さい!
haydnseek on flickr - 私は Epson 4490(GT-X750)を SilverFast SE で使い、その性能に脱帽しました! [詳細を読む...]
Ed Richards (2006-06-01) (英語) - I have been playing with the SilverFast demo for a few days to see if the multi-scanning really works. I have used multi-scanning on Vuescan with a Canon 9950 and the registration is not quite good enough. With the new SilverFast, the registration is usually perfect, even at 16 scans. It is very impressive. One possible bug is that when you start SilverFast it comes up with the last preview. If you are scanning the same negative in more than one session, it is easy to just start the second scan without a new preview. I think if you do the registration does not always work - I have noticed that every few multi-scans I get one with doubled images and I think this is why, but I have not kept notes so I am not sure yet. The cheapest way in is SilverFast SE, then scan to the HDR choice and do the corrections in your editor. Otherwise I think you need to go to AI to get 16/48 bit and corrections in SilverFast.
John Hennessy (2005-05-16) - 私は Siverfast AI の新マルチスキャン性能はマルチパス方式以上の立派な改良だと認めます。 私はそれをダウンロードして、前景に露草とクモの巣があるイメージを 4x5 ASTIA でトライしてみました。旧マルチパスを利用して、草の葉とクモの糸の前面に何度かトライし、明らかにフィルムと同じ位シャープでした。ひとつミスしたものでさえ、フィルム内のことごとくに2つの葉を作り出しました! しかし、たった1回のトライでのマルチスキャニングは、ベストなマルチパス以上に優れたものを作り出しました。皮肉にも、私が余分に払ったと後悔した事は良かったのでした...それはずっとそこにあるべきものです。 おそらく、Ai Studio (それはマルチスキャン能力を得るためにアップグレードする必要がある) は私がまだ気づいていない別の事をやりました。言い換えれば、もしマルチスキャンソフトがプログラミング・ブレークスルーなら、市場が生み出すものが何であれ、LSI社は値打ちがあるでしょう。 SE 版アップグレードの費用が少ないかが不思議でしたが、スキャナープロファイリングに最適な AI 版なくしては、どんなフォトグラファーもありえません。 私は、http://largeformatphotography.info/scan-comparison/でスキャン周りのテストを提供しており、いかに Epson が SilverFast に対しどうであるかを見るのは興味深いです。私はテストで使った Epson 3200 がその付属ソフトで使うのがもったいないと信じます。
Kirk Gittings (2005-05-17) - 私のテストにおいて、 SF Studio の新マルチサンプリング機能が見せたものは、まさにブレークスルーです...... SF Studio のノイズ低減機能に勝るものは考えにくいでしょう。 SF Studio を使った私のテストでは、たとえ完成品としてグレースケールイメージを調べても RGB ファイル(ノイズがほぼ完全に除去された)でのノイズ低減が最も効果的でした。 従い、私は 4x5 モノクロネガを 48bit RGB ファイル+ 16 サンプリングパスとしてスキャニングし、それから 16 bit グレースケールに変換しました。正反対は SFAI 6 で妥当でした。 SFAI 6 でのグレースケールスキャンによってノイズ低減を得られるでしょう。
Domenico Pescosolido - 皆さん、私はスキャナー Nikon V LS-50 について、Nikon Scan と SilverFast との間に何か重要な違いがあるなら知りたいのです。言い換えると、Nikon Scan と比べて SilverFast の方が良い出来栄えなのか、そして Nikon ソフトと比べて使いやすいのかを。

特に、私は FujiChrome Velvia 50 のスライド( 1/3 が緑&青のトーンに露出し、Nikon Scan では明暗差が大きすぎて適切なコントラスト&明るさにならず、うまくいかなかった)をいくつか持っています。
Thanks (http://www.photo.net/shared/community-member?user_id=663631)
simon_willisons_weblog_365 Simon Willison's Weblog - 私は SilverFast SE ドライバで旧型の Epson Expression 636 (GT-7000)を SCSI 接続+PowerMac G4 で今も楽しんで使っています。 OS にスキャナーを認識させるよう、起動時にスキャナーの電源をオンにしなければならない事以外、SCSI接続に関して何のトラブルもありません(毎月1回程度リブートするので問題なし)。

もしあなたのスキャナーソフトが気に入らないなら、SilverFast SE をチェックしてみると良いだろう。実際、価格が安く、広範囲のスキャナー(私の Epson のように古くてドライバが中止されたものまで)に対応しています。 SilverFast サイトからデモ版をダウンロードしてきちんと動作するなら製品を購入しても良いでしょう。

私はトップソフトウェアである SF Ai へのアップグレードを考慮中です。 Aiは ICCプロファイリング等のプロツール全てをもっています。私が高価なドラムスキャナーを 使用して以来、これほど進歩したスキャナードライバは見たことがありません。しかし、 ソフトウェアに満足したスキャナーが見つかりませんでした。 いや、全てのスキャナードライバがいやという訳ではなく、この場合、私はドライバに適したスキャナーを見つける必要がある位、気に入ったドライバが見つかった!とするべきです。 そして特に、レガシー(旧来の規格)ハードウェアをサポート(新製品を買わずに済む) してくれるSilverFast の連中が好きです。
Tom Carey (2011-08-25) (英語) - I tried out the demo version of VueScan and it is inferior to SilverFast 8 in every way, very few photo editing controls available. For my money SilverFast 8 is the best scanner software. (http://oceanplanetimages.smugmug.com/)
Professor Roderick Robertson, Saint Mary's University (英語) - I just purchased an upgrade to the new SilverFast software for an Epson scanner. It is fantastic! It was like getting a whole new scanner for the price of the upgrade.
Sandy Gutt (2013-02-14) (英語) - I'm using this PIE medium format scanners for a year now and I'm thrilled with the opportunities I have with SilverFast. The image automatics work almost perfectly, 90% of all images I do not need to optimize any further. And even old photographies with really strong color casts I can get completely restored.
Jeff Dell (2013-05-01) (英語) - My slide collection is huge, really huge. Until now I thought, I would never make it to digitize all my slides. But using the Powerslide and latest SilverFast software I can batch scan a complete magazine of slides at once. The results have convinced me, for the first time I have found a really effective way.
Steve Wagner (2013-04-08) (英語) - Bought the scanner. Downloaded SilverFast demo. Tried all the tools. Bought SilverFast. And now I am happy and satisfied.
Steve Huff (2010-04-26) (英語) - The V700 is a very nice upgrade from the V500 and comes with Epson Scan software as well as SilverFast SE, which I prefer in a HUGE way. If you want to go whole hog and get the best flatbed package you can get then Epson offers the V750 Pro which has coatings on the glass to help improve the quality AND it comes with the upgraded SilverFast AI which is great software and better than the SE version included with the V700. [詳細を読む...] (英語)
John R. Spurr (2011-08-24) (英語) - My thoughts on using SilverFast SE as my only scanner control program. Recently I had the misfortune of having my Windows XP Professional Computer die when the main board quit. While looking into upgrading with a new board or switch out completely to a New Window 7 Professional it became evident that I would have to make the big switch to a new replacement. I am heavily loaded with XP software so I was concerned about which software would have to be upgraded as well. I have an Epson Photo 3200 and have been extremely happy with the results that I have obtained. I am heavy into retouching and restoration of photos as it is a sizable part of my photo business. I installed all the software packed with the 3200 which consisted of the regular supplied company software and SilverFast SE. When I discovered just what I could do with the software and the amount of control that it offered for black and white films (such as by brand) as well as transparencies and prints, I selected to use it exclusively and never really used the alternative software.

Now I come to the recent mishap. Alas the older version of SFSE did not function with the new computer no matter what I tried. I had a sizable retouching job with a quick turn around needed and had to rely upon the original software to scan the prints. I was very unhappy with not the final results but the way I had to get there. I couldn't just pull up my old standby SFSE and choose the resolution, size of final print and perform all the adjustments to the final output before I even scanned the print. I had to do what I could do with any of those controls and had to set a higher resolution than needed so that I could resize later to get a decent final output. Plus forget about any adjustments to the image and not even have the ability to size for a final output.

After I finally finished I thought back of all the work that I needed to perform just to get prints and still have all the adjustments to perform yet and wondered if I would have tossed out the scanner if I hadn't had SilverFast SE in the beginning..... I owe my sanity and pleasure to what SilverFast SE has offer to me over the years.

So what did I do? Kept the scanner and purchased an upgraded SilverFast SE. Now I am content again.