banner_knowledge_en


2.3.19 Dust and Scratch Removal (SRDx)

If larger defects such as scratches or dust mar the picture, they should be removed after sharpening and before the final scan. SilverFast offers the SRDx tool (Smart Removal of Defects) for this purpose. It is important to adjust the desired resolution, the zoom factor, and the dimensions of the picture before calling SRDx.

The effect of SRDx can be monitored in the 1:1 preview on the monitor. Click the "1:1" button to open the navigator window, in which a yellow frame marks the current image section. This frame can be moved with the mouse to check the effect of SRDx on all the sections of the image. In the 1:1 preview, the Display menu can be used to adjust whether the original image or the repaired image should be shown. The Mark setting is very useful for adjusting the sliders. SilverFast 8 displays the detected defects to allow the user to set the slider so that just the required amount of correction can be applied. After clicking while holding Cmd and Shift down, the infrared image can be examined in case the scanner has infrared capabilities.

Scratches located in a homogeneous area such as in the example picture may be irritating, but they are very easy to remove with SilverFast 8. By using a mask, you can ensure that SRDx is only used in the area affected, and that other parts of the image will not accidentally be damaged by SRDx. That could happen, for example, if the tool has to be set to a very high setting to repair particularly severe defects.

A polygonal mask is drawn in exactly the same way as drawing in a vector drawing program: one click sets a corner point, while clicking and dragging generates a Bezier curve. This allows a mask to be created with great precision in any possible shape. The mask is complete when another click on the first point closes the polygon. The cursor indicates this by turning into a closed circle. Finally, the mask must be named.

If another shape is to be drawn, then select Add from the menu. The settings on the sliders in the SRDx tool palette will then apply to all polygons in the same way. In areas that are drawn using the quill tip setting Subtract, SRDx will no longer be applied. This can be used to remove parts of existing polygons, as well as entire polygons. To do this, just draw a larger polygon around the existing one.


button_previous button_up button_next


macOS Monterey 12.0
macOS Big Sur 11.0
Windows 11 (64bit)
Windows 10 (64bit)