English [change]
English
Deutsch
Français
Italiano
日本語
Español
Português
Russian
Chinese (Simp.)
Czech
Polish (Store only)
70
· Presets
SilverFast
®
Manual
·
Scan Mode* / Process Mode
Under scan mode select between "Normal", "Batch Mode",
"Normal (File)" and "Batch Mode (File)". With "Normal" the current scan frame will be scanned and the
image will directly appear in a window in the imaging applica- tion (e.g. Photoshop). With "Batch Mode" all scan frames on the prescan will directly
be scanned into separate windows in the imaging application. "Normal (File)" will scan the active scan frame directly to the
hard disk. "Batch Mode (File)" will scan all scan frames on the preview to
the hard disk. "to album"* will save the current image after optimization back
to album as a copy. ·
Original*
Three different types of originals can be selected from:
"Reflective", "Transparency" and "ADF / Document Feeder" "Transparency" and "ADF / Document Feeder" are only avail- able with flat-bed scanners when the appropriate hardware addition is available (and connected). ·
Positive/Negative*
You select between "positive" and "negative" according to the
film type used. Clicking "Negative" opens the dialogue window "SilverFastNegaFix". Scanners that have a hardware solution for positive-to-negative conversion, this can be reached by "Neg.Direct". SilverFastNegaFix will then be deactivated. ·
Frame-Sets*
This menu enables to save all all scan frames on the preview
including their individual positions and all individual parameters under one name. Previously saved frame sets can here be loaded or deleted. *Attention
The "default dialogue" windows differ
from scanner to scanner and some features are only available for certain scanners or certain imaging software. |