English [change]
English
Deutsch
Français
Italiano
日本語
Español
Português
Russian
Chinese (Simp.)
Czech
Polish (Store only)
9
6.1 · SilverFastSRD / iSRD
SilverFast
®
Manual
8. Slider "Continuity"
With noisy images or when the scratch is inside a part of the
image with lots of details, the value of the Continuity slider should be readjusted (between 0 and 10). A greater value will enable a better recognition of scratches in a "difficult" environment (noisy or very detailed images). Remark: In some cases the longish scratches are slightly bent.
Since this method is designed for horizontal or vertical scratches, it is required to watch the parameter settings more closely. For instance: A horizontal scratch which is 10 long and 1 pixel of width and with a slight bent extends to 4 lines of the image, cannot be recognized with values of 10 and 1 for length and width. In stead a value of roughly 0 (10 divided by 4) would be needed. Original
Continuity = 1
Continuity = 9
|